Telecom Cable Jointing & Closure Sealing
Heat shrink and cold shrink kits for fibre optic closures and copper telecom cable joints — from cable entry sealing at the closure base to branch-off jointing and end sealing.
Products in this illustration (6)
- Cold Shrink Tubing
Seals suitable cable connections without heat.
- Medium & Heavy Wall Tubes
Protects cable connections and outer joints.
- Branch-off Clip
Seals a multi-cable closure entry.
- Wraparound Closure Sleeve
Seals a non-pressurised cable closure.
- Cable Breakout
Seals a multicore cable branch.
- Cable End Caps
Seals an unused cable end.
Product range
Products for this industry (8)
Overview
A Heat Shrink Fibre Optic Closure Cable Entry Sealing Kit for the telecom industry, plus a range of products to join and seal copper telecom cable.
Heat Shrinkable Medium/Heavy Wall Tube insulates and seals the cable inlet to the base of a fibre optic closure, in cross-linked polyolefin. Cold Shrink Tube installs the same seal without a torch, factory-expanded onto a removable core.
Read the full overview
Branch Off Clip separates two cores of cable coming out of a telecom jointing kit, with a hot-melt adhesive outer layer holding the split in place.
Heat Shrink Low Voltage Cable Breakouts give a permanent environmental seal to the crutch of 2–7 core PVC, XLPE rubber and PILC cable up to 3.3 kV. Cold Shrink Breakout does the same job without a torch, in chloride- and sulfur-free EPDM rubber.
Heat Shrink Cable End Caps give tamper-proof mechanical protection and an environmental seal to cable ends; Cold Shrink End Cap seals the same ends against water and moisture ingress, in EPDM rubber compatible with XLPE, PVC, PILC or rubber-sheathed jackets.
Applications Served
- Fibre optic closure cable entry sealing
- Copper telecom cable jointing and splice protection
- Branch-off jointing kits for multi-core telecom cable
What Gala Offers
- Heat shrinkable medium/heavy wall tube insulates and seals cable entry to the base of fibre optic closures
- Branch off clip separates cable cores at the joint, with a hot-melt adhesive outer layer
- Cold shrink tubing installs a torch-free closure or joint seal
- Heat shrink low voltage cable breakouts for 2-7 core PVC/XLPE/PILC cable up to 3.3 kV
- Cold shrink breakout and end cap in chloride/sulfur-free EPDM rubber
- Heat shrink wrap around sleeves as a non-pressurised heat shrink closure