Product line
Heat-shrink sealing caps and couplers for pre-insulated pipe joints, post-tensioning ducts and HDPE pipe jointing, plus a three-layer corrosion protection sleeve for the weld joints of buried or exposed steel pipeline.
8 products in the Pre-Insulated Pipe Sealing range — 8 with downloadable datasheets, 2 with dimensional spec tables.
The family covers pre-insulated pipe sealing caps (single and double outlet, for district heating & cooling), a heat-shrink coupler for post-tensioning duct joints, a heat-shrink coupler for HDPE pipe jointing, and the Heat Shrink Three-Layer Corrosion Protection Sleeve — a cross-linked polyethylene sleeve for the weld joints of buried or exposed steel pipeline, sized Ø159 mm to Ø1016 mm, with a cathodic-disbondment result cited to ISO 21809-3.
Tested to ASTM D638, D2671, D570, D2240, D149 and D257, and ESI 09-11.
Browse every Pre-Insulated Pipe Sealing datasheet in the datasheet library →
Showing all 8 products
Heat Shrink Coupler joints sections of corrugated HDPE pipe with a hot-melt adhesive lining sealed to IP68, replacing butt welding, snap-fit or split couplers on water, sewer, drainage and underground cable-duct lines.
Datasheet
A cross-linked polyolefin coupler that joins post-tensioning duct sections with a hot-melt-lined, IP68-sealed connection for prestressed-concrete construction.
Datasheet
Heat Shrink Coupler is a cross-linked polyolefin tubing that joints post-tensioning duct sections with a hot-melt-lined, IP68-sealed connection, ensuring leak-tightness between consecutive duct lengths.
DatasheetSpec table
GTWS is a three-layer, cross-linked polyethylene heat shrink sleeve that protects the weld joint of buried or exposed steel pipeline, Ø159–1016 mm at 500 mm width, with hot-melt adhesive bonded to the pipe's PE coating and cathodic disbondment of 3 rad to ISO 21809-3.
DatasheetSpec table
GPPC1 heat shrink caps, 60–178 mm supplied diameter, seal pre-insulated pipe joints with a hot-melt adhesive lining sealed to IP68, factory-installed in single- or double-outlet configurations.
Datasheet
GPPC2 heat shrink dual caps seal pre-insulated pipe joints with a hot-melt adhesive lining sealed to IP68, manufactured from cross-linked polyolefin, in GPPC2 1565–55175 outlet sizes.
Datasheet
GPPC1 heat shrink caps protect pre-insulated pipeline weld joints with a hot-melt adhesive lining sealed to IP68, 60–178 mm supplied diameter, in single- or double-outlet sizes.
Datasheet
For district heating and cooling pipe manufacturers, Gala supplies heat shrink pre-insulated pipe sealing caps, a medium/heavy-wall tube for pipeline corrosion protection and HDPE pipe jointing, mastic-coated wrap-around sleeves and cold-applied mastic tape.
Datasheet
No products match your search.
Send us your requirement — voltage class, cable size, environment — and we'll point you to the right part.
