Cable Splice Clamp Components
Mechanical clamp components used in cable splice assemblies, built from corrosion-resistant materials with a captive screw, threaded band and non-removable housing.
Datasheet
Product line
Cable Accessories & Components — Solder Sleeves, Terminal Caps, Splice Clamps
The smaller components behind Gala's kits — solder sleeves, dip-moulded parts, PVC terminal caps (Termicap), elastomeric end seals, splice protection sleeves and cable splice clamp components.
8 products in the Accessories & Components range — 6 with downloadable datasheets, 2 with dimensional spec tables.
This family covers solder sleeves, dip-moulded and injection-moulded PVC components, the PVC Terminal Cap (Termicap), an elastomeric end seal for CCV/VCV/SSCV cable, a fibre-optic splice protection sleeve, a constant-force spring, and cable splice clamp components.
Individual products in this range cite IEC 60502-4, CENELEC HD 629.1, IEC 60502, IEC 60060, IEC 60230, ANSI/J-STD-006 and ANSI C37.20.2, alongside ASTM D149, D638 and D792.
Browse every Accessories & Components datasheet in the datasheet library →
Showing all 8 products
Accessories & Components products
Constant Force Spring
Constant Force Spring is made from stainless steel, a non-current-carrying part used for a solder-free electrical connection between metal cable elements and an earthing device, and also used on cast-resin, heat shrink and medium-voltage joints.
Dip Moulded Components
Dip moulded components for cable joints and terminations, with guaranteed technical particulars in compliance with IEC 60502-4 and CENELEC HD 629.1.
DatasheetSpec table
Elastomeric End Seal for CCV/VCV/SSCV
Gala Elastomeric End Seal is a rubber compound seal, used on the exit side of continuous vulcanization (CV) cable lines, that holds curing pressure at the set level and grips the cable during production runs.
DatasheetSpec table
Miscellaneous Cable Accessories
The Miscellaneous section of Gala’s range — constant force spring, mastic tape, clamp and solder sleeve.
PVC Terminal Cap (TERMICAP)
Termi Cap is a flexible PVC terminal cap used for insulating and protecting wire end terminals, tested to ANSI C37.20.2 for medium-voltage switchgear application up to 36 kV.
Datasheet
Solder Sleeve
A controlled soldering device for terminating a bare or tin-plated copper shield on cable with insulation rated for at least +85°C, combining a heat-shrinkable insulation sleeve, solder preform with flux, and a meltable sealing ring.
Datasheet
Splice Protection Sleeve (Fibre Optic)
A splice protection sleeve designed to give complete environmental and mechanical integrity to the coating or buffer of an optical fibre after splicing, resistant to heat shocks with no cracking, dripping or flowing.
Datasheet
No products match your search.
Need help selecting a Accessories & Components product?
Send us your requirement — voltage class, cable size, environment — and we'll point you to the right part.